1.In Key Tool max menu,switch to Condor Dolphin XP-005 page.Then connect with Dolphin XP-005 via bluetooth.
2.Connect OK.
3.Choose cut by bitting.
4.Input HY15.
5.It shows the M1 clamp,1.5mm cutter,and put the original key on the clamp,and fasten it.
6.Key learn process.
7.Key learn done OK.
8.Put the new key blade on the clamp,start cutting.
9.Cutting process.
10.Cut OK.
www.xhorsevvdi.com
没有评论:
发表评论